home > Products > Fuse Holder > F-70 Fuse Holder
prod_F-70.jpg
Click image to enlarge
F-70 Fuse Holder
Fuse Holder
Product ID: P0PKZ9
Availability: Usually Ships in 3 to 5 Days
Connection : Bayonet type UL : E101405 CSA : 65927
RoHS : RoHS Compliance
Rating 250V-30A
Insulation resistance DC500V, 100MΩ Min
Withstand voltage AC1500V 1 minute
Certificates & approvals UL, CSA
Main insulator Phenol (UL94V-0)
Knob Insulator P.B.T. (UL94V-0)
Terminal type Soldering
Body color B (Black)
Panel thickness 6.5mm (0.256 inch)(MAX)
Mate fuse 1/4X1-1/4inch (Ø6.35X31.8mm)
Note 1.Use only fuse Φ6.35×31.8mm. 2.Due to bottom terminal designed movable, it must away from any other article such as wire or components. 3.Must not apply any tension or extra force on the terminal after solder.4. We recommend that you download the product documents " mm-inch conversion chart"before you purchase this product.

F-70

Hand soldering condition

 

Soldering iron tip soldering temperature

390° C           /    734° F

Soldering iron tip soldering time

20 sec               

Frequency

2 times

 

Caution:

  1. Flow, re-flow soldering product not included.
  2. Please make sure product is complete cool down and under normal temperature before you doing second time soldering.
  3. Please confirm actual condition before using this product.
  4. Please make sure product is complete cool down and under normal temperature before you install fuse.
This website is powered by Servora.