home > Products > Fuse Holder > F-700-AL
prod_F-700-AL.jpg
Click image to enlarge
New Arrival
F-700-AL
Product ID: NOWJJY
Availability: Usually Ships in 3 to 5 Days
Color:
Connection : Horizontal type UL : E101405 RoHS : RoHS Compliance
Rating: 250V-10A
Insulation resistance: DC500V, 100MΩ Min
Withstand voltage: AC2000V 1 minute
Certificates & approvals: UL, C-UL
Main insulator: P.B.T. (UL94V-0)
Body color: W (Wite)
Terminal type: Screw driver(M4X8 Sems screw )
Installation screw torque: 1.2N·Max  , 1.0N Max: M4 Screw(M4=3.8mm/0.150 inch)(When using Flat washer)
Suitable Din Rail: (Top hat shape )width:35mm
Noeon Lamp:
Usage Voltage: AC100V-250V
Protector Resistance (installed): 150kΩ、1/4W
Discharge Start Voltage: Below AC75V
Discharge Current: 100V:Approximately0.3mA,200V:Approximately0.96mA,250V:Approximately1.3mA
Neon Lamp Life: 100V(Approximately 60,000 hours)(continuously) 200V:(Approximately 30,000 hours)(continuously) 250V:(Approximately 20,000 thours)(continuously)
Mate fuse: Ø6.4×30mm
Ø6.35×30mm
Ø6.35×31.8mm
Caution: meltdown indicator Fuse carrier Installed ., capable to use at Multi-position.
 
1.Do not open the cap of the Fuse Holder when Voltage is applied to the state.
2.deformed clip will caused overheating and will catch on fire.
3.Be caution of flux don't adhere to the part between fuse and  inside of clip when soldering.
4.Please combine the Fuse and Fuse clip after the soldered product has cooled down.
5.Don't use in the water.
6.Do not use outside of room to avoid sunlight.
Note:  1. Optional order products .2. Usage Voltage:AC100V-250V.
This website is powered by Servora.